A KitchenAid dishwasher that will not drain usually has a clogged filter, a blocked or kinked drain hose, or a failed drain pump. Standing water is left in the tub at the end of the cycle.
The fix is to clear the entire drain path and replace the pump if it has failed, then verify a complete drain cycle. A clogged air gap or disposer connection can also cause it.
Symptom and Error Guide
| Code / Symptom | What It Means | What We Do |
|---|---|---|
Won't drain | Clogged filter, hose, or pump | Clear the path, replace the pump if failed |
Drains slowly | Partial clog in the filter or hose | Clean the filter, clear the hose |
Water backs up | Air gap or disposer connection blocked | Clear the air gap or connection |
What We Check
- Oven showing an F-E code and locking out
- French-door refrigerator not cooling evenly
- Ice maker that stopped producing or dispensing
- Dishwasher not draining or leaving residue
Cleaning the filter regularly and scraping plates before loading prevent most drainage problems. A dishwasher that drains slowly before stopping is showing an early sign.
Want This Handled by a Technician?
Book online or call during confirmed business hours. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
When to Call a Technician
If the fix involves the sealed system, the gas system, or a control board, or if a fault returns after you clear it, it is time to have it diagnosed properly. We serve North Stamford and nearby neighborhoods with genuine OEM parts and written service terms.